Tube Condenser

Key Specifications/Special Features:

• Specifications:
  • Raw material:
    • Rolling welded steel tube: 4.76 to 6.35 x 0.71
    • Low carbon steel wire: 1.4 to 1.6mm
    • Bracket:
      Steel plate SPCC thickness: 0.6 to 2.0

      Base mounting plate:

      SPCC thickness: 0.6 to 2.0

      Technical standards: can produce according to customer's drawings or samples

      Performance:

      • Surface with electrophoresis coating to prevent the corrosion
      • Inner cleanliness can meet the requirements of R134a and CFC cooling system
      • Can satisfy the cooling capability requirements

      Structure:

      • Flat-type of wire-on tube condenser used at the back
      • Bended or spiral type of wire on tube condenser used at the bottom
      • Wrapped type of tube embedded on plate
      • Flat-type of louvre condenser used at the back
      • R134a cooling system tube inside standard
      • Residual moisture: ≤ 20mg/sqm
      • Residual dusty: ≤ 30mg/sqm
      • Residual mineral oil: ≤ 7mg/sqm
      • Residual chlorine: ≤ 3mg/sqm
      • Sealing density: ≥ 1.65mPa

      Specification of E-coating:

      • Coating thickness:
        • Thickness of anodic electrophoresis coating: ≥ 12μm
        • Thickness of cathodic electrophoresis coating: ≥ 20μm
        • Hardness of coating: ≥ 2H
        • Impact of coating: 50cm.kg/cm impact, no crack
        • Adhesion of coating: ≥ 2 grade
        • Flexibility of coating: around R=3D bend 180 degrees, no crack or no fall-off
        • Corrosion-resistant (salt spray GB2423)
        • Anodic electrophoresis coating: ≥ 24hrs
        • Cathodic electrophoresis coating: ≥ 96hrs
      • Packing: standard export carton and wooden pallet

      Payment Details:

      Payment Terms:
      

      T/T, L/C AT SIGHT