Condenser

Key Specifications/Special Features:

• Specifications:
• Raw materials:
  • Rolling welded steel tube: 4.76 to 6.35 x 0.71
  • Low carbon steel wire: 1.4 to 1.6mm
  • Bracket: steel plate SPCC thickness: 0.6 to 2.0
  • Base mounting plate: SPCC thickness: 0.6 to 2.0
• Technical standard: can produce according to client's drawing or samples
• Performance:
  • Surface with electrophoresis coating to prevent the corrosion
  • Inner cleanness can meet the requirement of R134a and CFC cooling system
  • an satisfy the cooling capability requirements
• Structure:
  • Flat type of wire on tube condenser used at the back
  • Bended or spiral type of wire on tube condenser used at the bottom
  • Wrapped type of tube embed on plate
  • Flat type of louvre condenser used at the back
• R134a cooling system tube inside standard:
  • Residual moisture: 󖼤mg/m²
  • Residual dusty: ≤ 30mg/m²
  • Residual mineral oil: ≤7mg/m²
  • Residual chlorine: ≤3mg/m
    2
  • Sealing density: ≥1.65MPa
  • Specification of E-coating:
    • Coating thickness:
      • Thickness of anodic electrophoresis coating: ≥12μm
      • Thickness of cathodic electrophoresis coating: ≥20μm
      • Hardness of coating: ≥2H
      • Impact of coating: 50kg/cm impact, no crack
      • Adhesion of coating: ≥2 grades
      • Flexibility of coating: around R=3D bend 180 degrees, no crack or no fall off
    • Corrosion-resistant (salt spray GB2423)
      • Anodic electrophoresis coating: ≥24hours
      • Cathodic electrophoresis coating: ≥96 hours
    • Packing:
    • Standard export carton and wooden pallet

    Payment Details:

    Payment Terms:
    
    T/T, L/C AT SIGHT